Hanging curtain rods in drywall during the process of curtain installation is honestly pretty tricky. While drywall may look solid enough, and it’s one of the more common ways of building the walls of homes in the US, they don’t properly hold screws. So, it’s not out of the question to ask yourself “how to hang curtain rods in drywall?” or even “how to hang heavy curtains in drywall?”, because both questions are completely acceptable and in fact very common.

 

There can be some major risks if you don’t know how to hang a heavy curtain rod in drywall. If it’s done improperly, you’ll be running the risk of needing to patch up some holes, your curtain rod may sag, and that just ruins the appearance. This blog post is going to help you learn how to install curtain rods in drywall. Even if you have drywall in your home, you’re more than entitled to spruce up those walls and give your home some nice window treatments.

 

Things You Will Need To Hang Curtain Rods In Drywall

 

Since drywall can be fairly tricky when it comes to the whole installation process for curtain rods or heavy curtains, it’s important to start first to getting to the bottom of what you’re going to need. This list will help you out.

Hammer

● 1 ¼ inch screws

● Plastic screw anchors

● 1/4-inch bit

● Pencil

● Drill

● Tape measure

You’re mostly likely going to need all of these, and it’s going to make the installation process much easier as well.

 

thehues curtain rod measurements

 

1.   Use Longer Screws Or Nails

 

While there are a variety of techniques out there, what’s going to matter in the end is the curtain rod set screw size. You can’t really do much unless you know the curtain rod screw size. So, the first step when hanging curtains or blinds is to get an idea of the curtain rod screws, but also look into a stud detector as well.

 

You’re going to want a stud behind the wall, otherwise you may be at risk of the curtains tearing the plaster.  Usually, it’s brackets that hold up curtain rods, so to ensure that there isn’t going to be any sagging or tearing of the plaster, make sure the screw curtain rod set is look into. Long nails or screws will be the best way to secure this.

 

How To Screw Curtain Rod Into Wall?

 

If you’re still wondering about the odds and ends of how to screw curtain rod into wall then this is everything you’re going to need to know. Here are the steps that you’re going to need to know:

 

1) Begin by taking measurements, mark with a pencil to denote the end of the curtain rod

 

2) Measure the distance between the mounting brackets and the curtain rod

 

3) Remove the brackets and drill ¼ inch hold on each mark

 

4) No. 8 plastic anchor screw should then be inserted; they need to fit snug so a hammer may be required

 

5) Mount both brackets and ensure that they’re both secure

 

6) Use measuring tape to find the center of the rod

 

Just take your time when it comes to this process, you’re going to need to perfect this.

 

2.   Add Wall Anchors

 

Drywall anchors for curtain rods can be one of the very best ways that you can ensure that your curtain rod will stay safe.  It’s true that one of the best ways to attach brackets to a stud behind the plasterboard is going to be the very best way to have a heavy curtain rod and curtains be completely secure and in place. However, it’s not always possible to manage this. This is where curtain rod anchors come into play.

 

Wall anchor curtain rod are available at most hardware stores. They come in a variety of shapes and materials, so you’re going to have plenty to choose from. Once you’ve attached your first anchor, you’re going to then want to double check the position of it. Make sure that everything is nicely aligned. Afterwards, you can then just easily place the end of the rod inside the bracket, hold the other end against it, and mark where you’re wanting this.

 

Do I Need Anchors For Curtain Rods?

 

Do I need anchors for curtain rods? Well, it’s hard to always determine do you need anchors for curtain rods when working on installing on drywall. While it’s not needed, there may very well be times where it is going to have to be required. In cases where there aren’t any studs or you can’t install studs within the plasterboard, this is when anchors can be used.

 

How To Install Wall Anchors For Curtain Rods?

 

When it comes to how to install curtain rods with anchors, the process is fairly similar to other ways to install on drywall. So there really isn’t need for concern on how to install wall anchors for curtain rods.  For starters, make sure you’re getting wall anchors that can hold the weight of your curtain rod and your curtains combined. The combined weight is absolutely important, and you can’t skip that. After installing the first anchor, make sure to double check the position that it’s in. The second one is going to have to align perfectly. Make sure to utilize measuring tape and a pencil for this.

 

3.   Install Additional Brackets

 

Last, but certainly not least, you’ll learn about how to install curtain rod brackets. If you’re able to attach curtain rods with a stud then adding center support bracket is going to be another way to stabilize the heavy window treatments. This is also going to prevent sagging. In general, figuring out how to hang curtain rod brackets is fairly simplistic. Also, you can’t forget that curtain rods typically require a support bracket for every 25 to 35 inches. So, if you have a window where the length is going over 6 feet, then you’re more likely going to need another additional bracket to help support it.