Home · · Poteau de support de voile d'ombrage en acier inoxydable

Poteau de support de voile d'ombrage en acier inoxydable

£309.00
£309.00
Frais de port calculés lors du paiement.

Poteau de support de voile d'ombrage en acier inoxydable

SÉLECTIONNER LA COULEUR: Mât de voile d'ombrage
TAILLE: 96 pouces (8 pieds)
not sure about sizing? get expert help.
Estimated Arrival Time: Nov. 07 - Nov. 14
connect to our specialist
Stainless Steel Sun Shade Sail Support Pole - TheHues

Poteau de support de voile d'ombrage en acier inoxydable

£309.00
£309.00
Product Details
Reviews

CARACTÉRISTIQUES

MatérielAcier inoxydable 304

Hauteur du poteau96 pouces (8 pieds) ou 144 pouces (12 pieds)

Poteau de support robuste pour voile d'ombrage :

* Fournit des points d'attache pour vos voiles d'ombrage.

* Ce poteau de support robuste et facile à installer est étanche et antirouille.

* Matériau en acier inoxydable 304, robuste et résistant aux chocs.

LE FORFAIT COMPREND

* Plaque de base x 1

* Boulons et écrous de perçage x 5

* Segments de poteau x 3 (4 segments pour la version 144 pouces)

* Système de serrage triangulaire x 1

* Boulon et écrou de serrage x 1

* Anneaux triangulaires x 4

La longueur du segment à trois ou quatre pôles dépend de la taille sélectionnée

*Version 96 pouces : trois segments de 32 pouces

*Version 144 pouces : quatre segments de 36,8 pouces

Shade Sail Support Rod Installation Manual Download PDF

Please refer to the section with the corresponding pole size:

Identify all the included components of the supporting rod:
• One base plate (including four expansion nails)
• One adjustable clamp (including four triangular rings, tightening bolt & nut and wrench)
• Three 32 inches pole segments. Two identical and one capped at one end
Identify all the included components of the supporting rod:
• One base plate (including four expansion nails)
• One adjustable clamp (including four triangular rings, tightening bolt & nut and wrench)
• Four 36.8 inches pole segments. Three identical and one capped at one end
The base must be drilled in to be secured. Mark four drilling points of the base and drill the holes using 12mm drill bit, suitable for any surfaces that can secure the nails including wooden foundations cement, and metal. Soft soil is not suitable.
• Insert the expansion brackets and screw on nails into the surface you drilled into.
• Screw on one of the connecting pole segments onto the base.
To attach the adjustable clamp onto the desired height. Put in the four triangular ring that goes into the clamp. Tighten the bolt and nut with the wrench.
Then screw to connect the other identical pole segments together before placing the top pole segment on lastly (with a capped top).

WRITE YOUR FEELING