UVShield™ Striped Waterproof Custom Triangle Sun Shade Sail

$119.00
$119.00
Shipping calculated at checkout.

UVShield™ Striped Waterproof Custom Triangle Sun Shade Sail

SELECT COLOR: Black
free shipping 9-16 days
connect to our specialist

FREQUENTLY BOUGHT TOGETHER

UVShield™ Striped Waterproof Custom Triangle Sun Shade Sail

UVShield™ Striped Waterproof Custom Triangle Sun Shade Sail

$119.00
$119.00
Product Details
Reviews

Premium Custom Sunshade Stay cool and protected in the outdoor

High Performing UV Protective Fabric

  • Designed to withstand the toughest outdoor conditions
  • Abrasion and mold resistent that is easy to clean and maintain

Customize All You Want

  • With a variety of size options available, you can get the perfect fit for your space.
  • Mounting hardware and adjustable ropes, ensuring that your installation will be secure and tailored
Installation
Follow our step by step simple installation guide

Sun Shade Sail Instruction Mannual

Determining the Anchor Point

Waterpooling will cause extra stress on the shade sail and your mounting surfaces. So it's recommended to install your shade sail with a tilt of at least 40 degree to allow water to drain. There are several different ways you can tilt your shade sail
Secure the correct angle between mounting point and sail corners: make sure your shade sail are based on the continuity of the diagonals and not the sides. This will help create even tension and a flat sun shade surface
Take the sun into consideration. Think about what time of day you'll usually be enjoying your outdoor space and where you want the shade to be located for a more effective installation

Measuring the Shade Sails

Make sure you are measuring from mounting point to mounting point, and not just measuring the area on the ground. It might help to determine and note down the height of each of your mounting points from the ground up, especially if you wish to anchor the shade sail onto walls.
Different shaped shade sail requires different measurements to be taken
 • Triangular: 3 sides
 • Rectangular: 4 sides & two diagonal
We recommend measuring from anchor point to anchor point. Based on the numbers you provide we'll deduct 20 inches on the either the longest side or the longer diagonal (depending on which shade sail it is - specified on product page) while maintaining the shape to ensure a stable attachment, proper tension and minimize sagging.
If you wish to cover a large area try combining several pieces of shade sails together.

Installing the Shade Sails

1.Place pad eye onto the determined mounting point and mark the four holes.
2.Use the corresponding sized drill bit to drill into marked points and insert expansion inserts a. (e.g. M6 requires 6-mm diameter drill bit)
3.Place pad eye back on and secure with nails
4. Install snap hook or adjustable turnbuckles as needed and make sure the tension of the shade sail surface is correctly distributed. The shade sail should be flat and evenly stretched out in all directions.
Ensure the mounting point direction is a continuation on the diagonal of the shade sail surface for even tension distribution.
Make sure the shade sails are installed at least 40 degree angle so that water can drain smoothly to prevent pooling
All corners of the shade sail need to be fully stretched out and evenly distributed
Apart from hardware installation kit and ropes we also offer support pole and ring clip that can be used to secure shade sails
 • The pole is secured at the base with four pieces of expansion nails
 • Install the ring buckle where you wish the mounting point to be and use with snap hook or turnbuckles to secure your shade.
Shades Measurement
Inside mount
  • Step 1: We recommend measuring width in three places - top, middle and bottom. Use the smallest of these measurements. Deduct 2/5 inches from your width measurement to ensure the best fit.
  • Step 2: Measure the height of window in three places - left, center, and right. Use the largest of these measurements.
Inside mount requires a minimum depth of 2.5 inches of the window frame.
For inside mounts under 45 inches wide, both no-drill and drill-in hardware are included.
Outside mount
  • Step 1: Measure the width of the area you wish to cover. For better coverage and appearance, we recommend adding approximately 8 inches (20 cm) on each side—left and right.
  • Step 2: Measure the height of the area, and similarly add 8 inches (20 cm) to the top and bottom for optimal fit and visual balance.
No minimum depth requirement
No-drill installation not available for outside mount
With Edge Binding