UVShield™ Waterproof Quadrati Custom Rectangle Sun Shade Sail
- Regular price
- $139.00
- Regular price
-
- Sale price
- $139.00
UVShield™ Waterproof Quadrati Custom Rectangle Sun Shade Sail
- Regular price
- $139.00
- Regular price
-
- Sale price
- $139.00
Shipping calculated at checkout.
bestseller
UVShield™ Waterproof Quadrati Custom Rectangle Sun Shade Sail
YOU MAY ALSO LIKE
Premium Custom Sunshade Stay cool and protected in the outdoor
High Performing UV Protective Fabric
* Engineered for everyday outdoor durability
* Abrasion and mold resistent that is easy to clean and maintain
Customize All You Want
* With a variety of size options available, you can get the perfect fit for your space.
* Mounting hardware and adjustable ropes, ensuring that your installation will be secure and tailored
Sun Shade Sails
Designed for maximum sun protection, this high - density fabric blocks up to 90 % of harmful UV rays, keeping your space cooler and safer while maintaining a sleek, modern look.
Please note: While the fabric is water-resistant, it is not designed to hold pooled water. For optimal performance and longevity:
* Ensure your shade sail is installed at a recommended 40° angle when selecting mounting points, so rainwater can run off easily.
* Avoid leaving the sail exposed to prolonged heavy rain; during storms, we recommend detaching at least one corner to allow water to drain instead of pooling in the center.
* If water accumulation occurs, remove it promptly.Long - term water pooling may cause irreversible fabric stretching and sagging.
Installation
Follow our step by step simple installation guide
Sun Shade Sail Instruction Mannual
Determining the Anchor Point
Waterpooling will cause extra stress on the shade sail and your mounting surfaces. So it's recommended to
install your
shade sail with a tilt of at least 40 degree to allow water to drain. There are several different ways you
can tilt your
shade sail
Secure the correct angle between mounting point and sail corners: make sure your shade sail are based on
the continuity
of the diagonals and not the sides. This will help create even tension and a flat sun shade surface
Take the sun into consideration. Think about what time of day you'll usually be enjoying your outdoor space
and where
you want the shade to be located for a more effective installation
Measuring the Shade Sails
Make sure you are measuring from mounting point to mounting point, and not just measuring the area on the
ground. It
might help to determine and note down the height of each of your mounting points from the ground up,
especially if you
wish to anchor the shade sail onto walls.
Different shaped shade sail requires different measurements to be taken
• Triangular: 3 sides
• Rectangular: 4 sides & two diagonal
• Triangular: 3 sides
• Rectangular: 4 sides & two diagonal
We recommend measuring from anchor point to anchor point. Based on the numbers you provide we'll deduct 20
inches on the
either the longest side or the longer diagonal (depending on which shade sail it is - specified on product
page) while
maintaining the shape to ensure a stable attachment, proper tension and minimize sagging.
If you wish to cover a large area try combining several pieces of shade sails together.
Installing the Shade Sails
1.Place pad eye onto the determined mounting point and mark the four holes.
2.Use the corresponding sized drill bit to drill into marked points and insert expansion
inserts a. (e.g. M6 requires 6-mm
diameter drill bit)
3.Place pad eye back on and secure with nails
4.
Install snap hook or adjustable turnbuckles as needed and make sure the tension of the shade sail surface
is correctly
distributed. The shade sail should be flat and evenly stretched out in all directions.
Ensure the mounting point direction is a continuation on the diagonal of the shade sail surface for even tension
distribution.
Make sure the shade sails are installed at least 40 degree angle so that water can drain smoothly to prevent pooling
All corners of the shade sail need to be fully stretched out and evenly distributed
Apart from hardware installation kit and ropes we also offer support pole and ring clip that can be used to secure shade
sails
• The pole is secured at the base with four pieces of expansion nails
• Install the ring buckle where you wish the mounting point to be and use with snap hook or turnbuckles to secure your shade.
• The pole is secured at the base with four pieces of expansion nails
• Install the ring buckle where you wish the mounting point to be and use with snap hook or turnbuckles to secure your shade.
WRITE YOUR FEELING
C
Shade for boat
Ordering the shade was very easy and customer service contacted me to insure my measurements were correct and to get more detail measurements. Shade turned out perfect and was a lifesaver for the high temperatures in direct sun. Highly recommend this company and will use them again in the future. Will send pictures when I can.
J
Mainly bought to block out a 2-3 hour window of sun but will shield a patio or balcony from other weather.
D
We liked this so much I ordered a second in another color! It does not come with hardware and installation is difficult, I wont lie. But it'd a good product and great quality. The size is awesome!
T
I am very very happy with this product .And the customer service is also very good.
V
The shade sails are very good. We hung them sideways and the effect was good. Thumbs up
Shades Measurement
Inside mount
- Step 1: We recommend measuring width in three places - top, middle and bottom. Use the smallest of these measurements. Deduct 2/5 inches from your width measurement to ensure the best fit.
- Step 2: Measure the height of window in three places - left, center, and right. Use the largest of these measurements.
Inside mount requires a minimum depth of 2.5 inches of the window frame.
For inside mounts under 45 inches wide, both no-drill and drill-in hardware are included.
For inside mounts under 45 inches wide, both no-drill and drill-in hardware are included.
Outside mount
- Step 1: Measure the width of the area you wish to cover. For better coverage and appearance, we recommend adding approximately 8 inches (20 cm) on each side—left and right.
- Step 2: Measure the height of the area, and similarly add 8 inches (20 cm) to the top and bottom for optimal fit and visual balance.
No minimum depth requirement
No-drill installation not available for outside mount
No-drill installation not available for outside mount
Estimated Arrival Time: Oct. 27 - Nov. 01
ADD TO CART|