Store tissé motorisé en bambou Toni - Noir
- From
- Prix régulier
- $384.00
- Prix régulier
-
- Prix de vente
- $384.00
Store tissé motorisé en bambou Toni - Noir
- From
- Prix régulier
- $384.00
- Prix régulier
-
- Prix de vente
- $384.00
- From
- Prix régulier
- $384.00
- Prix régulier
-
- Prix de vente
- $384.00
Free Tiebacks
Matching Tiebacks
Total of 30-45% light blocked with the selected curtain with no liner
Product Details
Reviews
Installation Guide
FAQ
Craftsmanship & Material
- Artisan Handwoven: Meticulously crafted using traditional techniques; each piece is unique.
- Raw Beauty: Preserves natural plant texture and knots for an authentic, earthy look.
- Chemical-Free: Uses natural dyes with zero additives—safe for kids and pets.
Performance & Benefits
- Light Control: Blocks 80% of UV rays, filtering light softly while ensuring privacy.
- Cooling Effect: 50% more breathable than fabric curtains; reduces indoor temp by 4-5°F via superior airflow.
- Weather Resistant: Naturally insect-repellent and mildew-resistant, ideal for humid environments.
Be the
first to write a review
Woven Shades Instruction Mannual
Inside Mount
Drill-Mounting Installation (Inside Mount)
Accessories Included:
• L-shaped mounting brackets x2
• Expansion anchor x8
• 24mm screws x8
• Cord cleat x1 (Only included for corded shades)
• 11mm screws x2 (Only included for corded shades)
Make sure the bracket is installed with 1" (approx 2.5cm) clearance from the edge of the window frame to prevent the headrail from sticking out after installation.
Ensure symmetrical spacing between brackets. After confirming the location, mark the holes for drilling. Use an electric drill or screw drive to secure the brackets in place. If your wall is concrete textured please use the expansion screws for secure installation.
For inside mount, mounting brackets can be secured on top or on the side, depending on your space.
Once both brackets are installed, hold the headrail up and insert the bolt into the slit. Then rotate the nut until it is securely placed.
For corded shades, fix the cord cleat to the side of the window to coil shade cords, preventing accidental strangulation hazards for children and pets.
Outside Mount
Drill-Mounting Installation (Outside Mount)
Accessories Included:
• L-shaped mounting brackets x2
• Expansion anchor x8
• 24mm screws x8
• Cord cleat x1 (Only included for corded shades)
• 11mm screws x2 (Only included for corded shades)
1. For optimal coverage and a finished look, we recommend installing the headrail 8 inches above the
window frame.
2. The width should be 8 inches wider than your window frame on each side for better coverage (16 in
total)
Make sure the brackets are leveled and mark the drilling holes.
Use an electric drill or screw drive to secure the brackets in place. Please use expansion screws if drilling into concrete surfaces.
Once both brackets are installed, hold the headrail up and insert the bolt into the slit. Then rotate the nut until it is securely placed.
For corded shades, fix the cord cleat to the side of the window to coil shade cords, preventing accidental strangulation hazards for children and pets.
FAQ
Complimentary Holiday Delivery
Made-to-Measure
Dedicated Customer Support
- Step 1: We recommend measuring width in three places - top, middle and bottom. Use the smallest of these measurements. Deduct 2/5 inches from your width measurement to ensure the best fit.
- Step 2: Measure the height of window in three places - left, center, and right. Use the largest of these measurements.
For inside mounts under 45 inches wide, both no-drill and drill-in hardware are included.
- Step 1: Measure the width of the area you wish to cover. For better coverage and appearance, we recommend adding approximately 8 inches (20 cm) on each side—left and right.
- Step 2: Measure the height of the area, and similarly add 8 inches (20 cm) to the top and bottom for optimal fit and visual balance.
No-drill installation not available for outside mount
STEP 1
SELECT YOUR MOUNTING TYPE
INSIDE MOUNT
OUTSIDE MOUNT
STEP 2
MEASURE WIDTH
Our system will automatically deduct 1/2" to ensure proper usability.
STEP 2-2
ADD EXTENSIONS
STEP 3
MEASURE HEIGHT
STEP 4
YOU'RE ALL SET!
Based on the information provided, our recommended order details are as follows: